API · ASME · DIN · EN 標準工業閥門
可變孔口雙調節閥
可變孔口雙調節閥以閥門自身的可變節流而非固定孔口進行平衡，適用於原本需要在線另設流量測量裝置的較大法蘭口徑。流量自廠商流量測量圖讀取而非一體孔口。選型取決於法蘭等級對美標管件、DN65-DN300 區間，以及調試團隊讀取流量的方式——圖表對獨立固定孔口或測量裝置。典型結構帶調節盤、雙調節裝置與位置指示器，常見調試變體增加一對測試點使流量直接在閥上測量與調節；需要更高測量精度時，DRV 與固定孔口計量站組成調試套組。流量選型經廠商 KV 圖（KV = Q x 36 / sqrt(hl)，壓損單位 kPa），Kv 值按開度百分比自 100% 至 20% 公布——DN65 自全開 Kv 78.5 降至 20% 開度的 10.5。
屬於 平衡閥 系列
最後更新： 2026-10
系列規格
| Nominal valve connection size | DN65 to DN300 |
|---|---|
| Pressure class / nominal rating designation | PN25 |
| End connection types | Flanged connections - ANSI Class 125 |
| Valve body material | Ductile Iron |
| Operation / closure mode | Manual (handwheel) |
| model line | DA931 DN65 to DN300 Variable Orifice Double Regulating Valve (VODRV) – Ductile Iron Class 125 |
| flow measurement | Per the DOC SD1-20 Flow Factor KV & KVs Chart: KV = Q x 36 / sqrt(hl) with published Kv values per opening percentage (DN65-300); see Flow Measurement Graphs for the benchmark DA931 line. |
| test points option | Available fitted with test points for variable-orifice flow measurement and regulation — the standard configuration for commissioning set-ups. |
| construction | Fitted with a regulating disc, double regulating disc, double regulating device and position indicator. |
| commissioning set pairing | Can be coupled with a fixed-orifice metering station as a commissioning set: the DRV regulates, the fixed orifice measures. |
| max temperature note | Cast-iron double regulating variants carry a restricted-use maximum temperature of 180 degC. |
| flange standard variant | PN16 variant to BS EN 1092-2 exists alongside the PN25/Class 125 benchmark segment. |
| kv sizing formula | To size within a suitable hl band: KV = Q x 36 / sqrt(hl). To find hl with known KV: hl = Q2 x 1296 / KV2. To find flow with known KV: Q = sqrt(hl x KV) / 36. Where Q = Flow l/s and hl = headloss in kPa. |
| kv by opening table | Kv values are published per opening percentage for the BV203/BV307 double regulating range, DN15 to DN300 from 100% down to 20% open; e.g. BV203 DN65: 78.5 (100%), 65.8 (90%), 53.5 (80%), 45.3 (70%), 37.1 (60%), 29.6 (50%), 21.6 (40%), 14.1 (30%), 10.5 (20%); DN300: 2430 down to 644. |
| fvo design | Variable orifice single unit Y-pattern globe valves, Fitted with a pair of measuring plugs, Microset handwheel and presetting scale is readable from all directions, Regulating and isolating functions, Setting can be locked with allen key |
| fvo end connections | BS 4504 PN16 / EN 1092-2 PN16 / BS 4504 PN25 / EN 1092-2 PN25 / ANSI Class 150 (Specify on order) |
| fvo design standard | BS 7350 |
| fvo application | Applicable for hydronic balancing of heating and cooling systems |
| fvo working pressure | 16bar, 25bar |
| fvo shell test pressure | 24bar, 37.5bar |
| fvo seat test pressure | 17.6bar, 27.5bar |
| fvo working temperature | -10°C ... 120°C |
| fvo suitable media | Water |
| fvo model variants | F63V16, F63V25 |
| fvo body material | Ductile Iron |
| fvo bonnet material | Ductile Iron |
| fvo stem material | Stainless Steel 410 (DN65 ... DN300), Stainless Steel 431 (DN350 ... DN600) |
| fvo balancing cone material | EPDM coated DI |
| fvo gland material | Brass (DN65 ... DN150), Ductile Iron (DN200 ... DN600) |
| fvo handwheel material | DZR Brass |
| fvo packing material | Non-Asbestos |
| avo design | variable orifice double regulating valve (VODRV) |
| avo body material | ductile iron |
| avo sealing cone material | EPDM sealing cone |
| avo shutoff class | tight shut off |
| avo end connection | Flanged ends are drilled to PN16 |
| avo position indicator | a visual position indicator on the handwheel |
| avo test points | 2 fitted test point and extensions |
| avo pressure rating | 16 bar |
| avo working temperature | -10°C to +120°C |
| avo size options | 2" (DN50), 2.1/2" (DN65), 3" (DN80), 4" (DN100), 5" (DN125), 6" (DN150), 8" (DN200) |
| vvo typology | Static balancing |
| vvo body material | Cast Iron |
| vvo design | Variable orifice cast iron double regulating valve |
| vvo size range | Diameters from DN040 – 11⁄2” to DN400 – 16′′ |
| vvo flange standard | Flanged PN16 according to EN1092-2 (ex DIN2533) |
| vvo face to face standard | Lengths according to EN558-1 series 1 (ex DIN3202 F1) |
| vvo coating | Alkyd/acrylic single layer waterpaint coating (50-100μm) |
| vvo kv tolerance | Tolerance on nominal Kv for completely open valve ±5% |
| vvo test points | With plugged threaded drains (1⁄4” ISO 7/1Rp) for test points, Provided with test points (given unmounted) |
| vvo certification | TR CU 010 compliant, Free of CE marking for DN≤300 (cat. according to Art. 4.3 Dir. 2014/68/EU) |
| vvo pressure rating | PN16 |
| vvo size options | DN 40 , 50 , 65 , 80 , 100 , 125 , 150 , 200 , 250 , 300 , 350 , 400 |
| vvo working conditions | water, -10°C to +110°C below 0°C only for water with added antifreeze fluids over 100°C only for water with added anti-boiling fluids (ethylene glycol or propylene glycol mixtures up to 50% may be used) |
| vvo media restrictions | Not suitable for: gases group 1 & 2, liquids group 1 (Dir. 2014/68/EU) |
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。
常見問題
可變孔口雙調節閥的報價詢問應包含哪些內容？
執行標準與壓力等級、公稱口徑、閥體與閥座材質、介質及溫度、目的地——缺失的資訊會在報價過程中確認。
可變孔口雙調節閥提供哪些口徑與壓力等級？
本頁面尚未公布該閥門經驗證的口徑與壓力等級範圍——適用於您工況的口徑與壓力等級會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。
可變孔口雙調節閥提供哪些閥體材質？
本頁面尚未公布該閥門經驗證的閥體材質範圍——適用於您工況的閥體材質會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。