規格
| Valve body material | Ductile Iron, WCB, SS304, SS316 |
|---|---|
| Disc Materials | Ductile Iron, SS304, SS316, Aluminium Bronze |
| Stem material | SS410, SS420, SS416, SS431 |
| body seat materials | 13Cr, cobalt-chromium hardfacing alloy, SS304, SS316 |
| Seat material | Stainless Steel + Graphite |
| Operation / closure mode | Gear Operated, Electric Actuated, Pneumatic Actuated |
| End connection types | Wafer Type |
| Nominal valve connection size | DN50 to DN600 |
| Pressure class / nominal rating designation | PN10 to PN63, Class 150 to Class 1500 |
| Design standards | API 609, DIN 2559, EN 593 |
| Face-to-face dimensional standard | ASME B16.5, DIN 3202 F4, EN 558-1 |
| Flange standards | DIN, ANSI B16.1, BS 4504, EN 1092 |
| Inspection and pressure-test standards | API 598 |
應用與選型指引
Select the wafer execution where face-to-face length and weight dominate - long pipe runs, skids and retrofits between existing flanges - and the duty is hot, abrasive or fire-exposed enough to rule out resilient seated executions. Size inside DN50 to DN600 against PN10 to PN63 or Class 150 to Class 1500, confirm the laminated stainless-and-graphite seal against the medium, and match the wafer profile to DIN 3202 F4 or EN 558-1.
常見問題
What does the third offset contribute in a wafer body?
The third offset angles the seat cone so the disc clears the seat immediately on opening and cams into it only at closure, eliminating rubbing travel. That is what lets this execution run a metal seal (stainless steel with graphite per the benchmark page) instead of a resilient liner, extending the temperature and fire-safe envelope while keeping the wafer clamp short.
Which actuation should I pick?
The benchmark page declares gear, electric actuated and pneumatic actuated operation. Gear is the default for manual duty across DN50 to DN600; electric suits remote throttling without instrument air; pneumatic gives the fastest stroking for process shutdown. Size the actuator against the PN10 to PN63 line rating and disc diameter.
What information is needed to quote a wafer triple offset butterfly valve?
Nominal size within DN50 to DN600, pressure class (PN10 to PN63 or Class 150 to Class 1500), body and disc material from the declared range (ductile iron, WCB, SS304, SS316 and aluminium bronze trims), operation mode, and the mating wafer standard (DIN 3202 F4 or EN 558-1). Those points fix the execution and clamp length.
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。