系列規格
| Nominal valve connection size | DN25 to DN150 |
|---|---|
| Pressure class / nominal rating designation | PN10, PN16, 150LB |
| Sleeve Material | Rubber |
| Materials (component scope as published) | Cast iron, Carbon Steel, SS304, SS316 |
| Sleeve End Options | Extended hubs with clamps to slip over pipe ends, or flanged ends to standard dimensions |
| Enclosure Styles | Exposed-sleeve construction is standard; another style fully encloses the sleeve within a metallic body |
| Vacuum Limit | Exposed sleeves have limited vacuum duty (collapse tendency); encased builds can hold vacuum service by applying vacuum within the metal casing |
| Design standards | ANSI, DIN, JIS |
| Inspection and pressure-test standards | BS6755 |
| internals | Stem: Carbon Steel, Platen: Cast Iron, Trolley: Cast Iron, Bracket: Cast Iron, Handwheel: Cast Iron |
| flange dimension standards | ANSI B16.5, DIN3202, JIS |
| working principle | Full-bore (fully ported) control valve that obstructs flow by pinching an elastic sleeve |
| media isolation | Flowing media is completely isolated from any internal valve parts; the sleeve contains the media and reduces contamination |
| air operated self action | Air-operated builds need no actuator: the valve closes as soon as pressurized air enters the body and reopens by process-flow force when the air exhausts |
| construction | A sleeve molded of rubber or other synthetic material plus a pinching mechanism; all operating portions are external to the valve |
| abrasion resistance | Natural and synthetic rubber/plastic bodies give good abrasion resistance; little sleeve damage keeps flow virtually unimpeded |
| encased operation | Encased builds close by wheel-and-screw, hydraulic, or pneumatic pressure within the metal case forcing the sleeve walls together |
| generic envelope | General envelope: maximum operating temperature about 250 °F with pressure typically 100 psig at 1 in. falling to 15 psig at 12 in.; special builds span -100 to 550 °F at 300 psig |
| throttling character | Elastomer-sleeve construction gives smooth venturi flow, centerline closure and good throttling characteristics |
| sleeve selection rule | Sleeve material is selected on media corrosiveness/abrasiveness, with operation temperature kept within the polymer limit |
| execution options | Buried-service designs and options such as AWWA nuts, chainwheels, stem extensions and bevel gear actuators exist at reference executions |
| manual pressure size tiers | manual builds DN15-DN100 rated up to 5 bar, manual builds DN125-DN200 rated up to 3 bar, manual builds DN250 rated up to 2 bar, a DN80-only manual execution rated up to 6 bar, a high-pressure manual series to 400 mm at 1/6/10/16/25/40 bar pressure steps |
| manual pressure span 3 40 | manual pinch valve maximum operating pressure depends on the type and nominal size and spans 3 to 40 bar |
| manual handwheel pinch bar mechanism | manual builds close the sleeve with one or two pinch bars arranged horizontally above and below the sleeve, guided sideways by two rods and driven through a hand wheel |
| manual incrustation breakaway | closing-induced sleeve deformation causes incrustations inside the sleeve to break away, making the manual build practically blockage-free |
| air operating pressure rule | air-operated builds reach a maximum operating pressure of about 2-6 bar depending on the nominal diameter |
| air flanged series dn40 dn300 | air-operated flanged executions use a white epoxy powder coated aluminium body with PN10/16 flanges in sizes DN40-DN300 |
| air connection series spread | multi-connection air builds (flanges, tri-clamps, weld-on ends, threaded spigot, BSP internal thread) DN10-DN150, BSP internal-thread builds in standard black or white food-quality POM, DN10-DN50, socket-connection builds in stainless steel or POM with PVC or aluminium bodies, DN10-DN50, road-tanker semi-silo connection builds in DN80 and DN100 |
| high performance air series 400mm | a high-performance air-operated series extends to sizes up to 400 mm |
| sleeve compound options ako | natural rubber (standard and food quality), EPDM (standard and food quality), nitrile (standard and food quality), silicone, FKM, CSM, neoprene, butyl |
| air accessories list | solenoids, pressure switches, safety arrangements, vacuum systems, quick exhausts, proportional control, pressure regulators |
| elliptical body lip closure | the elliptical body design makes the rubber sleeve close the same way every time, forming a lip shape that gives completely tight shut-off even with large solids |
| air sleeve rebound reopen | when the compressed-air supply is interrupted and the casing vents, the sleeve reopens by its rebound elasticity, restoring full-bore passage |
| hd construction types | heavy-duty pinch valve series are offered in three construction types: open body, enclosed body, and enclosed/sealed body |
| hd size envelope by construction | open-body builds DN80-DN600 (3-24 in), enclosed builds DN25-DN1000 (1-40 in), enclosed/sealed builds DN25-DN800 (1-32 in) |
| hd pressure envelope by construction | pressure envelope 0-25 bar (0-362 psi) on open-body builds and 0-100 bar (0-1450 psi) on enclosed and enclosed/sealed builds |
| hd temp envelope by construction | temperature envelope -25 to +50 °C (-32 to 122 °F) on open-body builds and -25 to +80 °C (-32 to 176 °F) on enclosed and enclosed/sealed builds |
| two pinch bars centerline closure | during closing, two pinch bars squeeze the valve sleeve shut on the center line; in the open position the valve is full bore with no flow restrictions |
| bubble tight solids flaking | bubble-tight shut-off is maintained even with solids built up on the sleeve wall, and compression flakes crystallized particles off the sleeve surface |
| conical sleeve linear control | a conical sleeve improves controllability and produces a linear control curve |
| sleeve only contact replaceable | the sleeve is the only part in contact with the medium and the only replaceable part, changeable on site |
| control sizing iec60534 | control valve sizing for pinch valves is based on the international IEC 60534 standard, harmonized with ANSI/ISA S75 |
| gl size envelope by body | metal-body general-line builds DN50-DN250 (2-10 in), polyamide-blend plastic-body builds DN50-DN150 (2-6 in) |
| gl pressure envelope | both general-line series are rated 0-10 bar (0-145 psi) |
| gl temp envelope by body | metal-body general-line builds 0 to +110 °C (32-230 °F), polyamide-blend plastic-body builds 0 to +70 °C (32-158 °F) |
| gl face to face en558 | face-to-face dimensions follow industry standard EN 558 series 7, giving easy and quick installation |
| gl body opening tags | general-line metal-body builds carry opening tags in the sleeve as standard; the lighter plastic-body variant uses a corrosion-resistant polyamide-blend body |
| no stretch sleeve arches | one tube design uses two joint-like expansion arches that flex instead of stretch when closing, extending sleeve life |
| wear sensor indicator wire | an embedded wear-sensor indicator wire alerts maintenance personnel when the tube is worn, enabling preventive maintenance |
| inline tube change no recalibration | the tube or sleeve can be changed with the valve in line, saving maintenance time and eliminating the need for recalibration |
| self cleaning flexing antijam | the self-cleaning flexing action of the elastomer tube prevents build-up of scaling deposits and keeps the valve from seizing or jamming even with high solids |
| asme standard face to face | face-to-face dimensions to ASME standard allow drop-in placement into an existing pipeline replacing other standard valves |
| air flanged build listing sample | air-operated flanged builds are listed at DN80 (3 in) PN10 with RF flanged ends, in aluminium-alloy or stainless-steel bodies, including solenoid-integrated executions |
範圍與來源備註
| pressure framing | Pressure framing: the referenced general envelope is a sleeve rating (100 psig at 1 in. falling to 15 psig at 12 in., special builds 300 psig), while the tenant page lists flange classes PN10/PN16/150LB - sleeve pressure capacity and flange class are different limits and the mapping is unstated. |
|---|---|
| body concept | Body concept: general references describe the sleeve itself as the valve body (rubber/plastic bodies), while the tenant construction wraps a rubber sleeve in cast iron/carbon steel with cast-iron internals - the tenant build corresponds to the encased style, which references treat as a separate category. |
| duty split | Duty split: reference executions cite excellent throttling characteristics (venturi flow, centerline closure), while the tenant page positions the valve for isolation of abrasive/corrosive media - isolation and modulating duty depend on execution. |
| temperature ceiling | Temperature ceiling: the polymer limit governs operation temperature (about 250 °F general, to 550 °F special), but the tenant page states no temperature band for its rubber-sleeve build - the tenant ceiling depends on the sleeve polymer, which is listed only as generic rubber. |
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。
常見問題
夾管閥的報價詢問應包含哪些內容？
執行標準與壓力等級、公稱口徑、閥體與閥座材質、介質及溫度、目的地——缺失的資訊會在報價過程中確認。
夾管閥提供哪些口徑與壓力等級？
本頁面尚未公布該閥門經驗證的口徑與壓力等級範圍——適用於您工況的口徑與壓力等級會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。
夾管閥提供哪些閥體材質？
本頁面尚未公布該閥門經驗證的閥體材質範圍——適用於您工況的閥體材質會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。
本系列的類型
類型
氣動夾管閥
氣動夾管閥以向閥體與增強彈性套管之間充入壓縮空氣的方式關閉與調節，介質僅接觸套管而驅動完全為氣動——磨蝕漿料、粉體與腐蝕液體的全通徑開關與比例投放任務。產品範圍涵蓋四個系列——VMP 塑膠閥體 3/8"-2"（10-50 mm）、VMC 鋁與不鏽鋼閥體 3/8"-4"（10-100 mm）、ANSI 或 DIN 法蘭連
查看規格 →類型
機械式夾管閥
機械式夾管閥以調節機構驅動的水平壓桿壓縮彈性套管——手輪、氣缸、液壓缸或電機械驅動——在不使用壓縮空氣閥體腔的場合提供封閉、確定的夾閉控制。套管是主要承壓部件也是唯一濕潤部件；開啟狀態為 100% 全通徑，關閉全程維持光滑文丘里流道，漿料與磨蝕介質通過時無裂縫、縫隙或死角。產品範圍涵蓋三個系列——OV 手動閥、VZ 封
查看規格 →類型
夾管控制閥
夾管控制閥是常閉型夾管閥變體：壓縮空氣對抗彈簧回復開啟套管，洩放空氣則使閥門失效安全關閉——這是料倉安全系統與失效安全開關任務中、介質僅接觸套管的標準選擇。產品範圍涵蓋單缸閥 15 mm 至 50 mm 與雙缸閥 65 mm 至 250 mm，最大管線壓力按口徑段遞減（15-32 mm 為 5 bar、40-150 m
查看規格 →