API · ASME · DIN · EN 標準工業閥門
氣動夾管閥
氣動夾管閥以向閥體與增強彈性套管之間充入壓縮空氣的方式關閉與調節，介質僅接觸套管而驅動完全為氣動——磨蝕漿料、粉體與腐蝕液體的全通徑開關與比例投放任務。產品範圍涵蓋四個系列——VMP 塑膠閥體 3/8"-2"（10-50 mm）、VMC 鋁與不鏽鋼閥體 3/8"-4"（10-100 mm）、ANSI 或 DIN 法蘭連接的 VF，以及卸料倉用的 VT——套管配方依任務匹配（天然橡膠用於磨蝕漿料、EPDM 耐化學、NBR 用於含油介質、衛生用途用 FDA 合規材料），經氣壓實現精確百分比流量調節、氣泡級關斷，水平或垂直安裝均不影響性能。選型取決於管徑與連接型式、套管配方對介質，以及為對抗管線壓力關閉所需的壓縮空氣供應。
屬於 夾管閥 系列
最後更新： 2026-11
系列規格
| product lines | VMP (plastic body), VMC (aluminum and stainless steel), VF (aluminum and stainless steel), VT (aluminum and stainless steel) |
|---|---|
| vmp size range | 3/8" - 2" diameters (10 mm - 50 mm) |
| vmc size range | 3/8" - 4" diameters (10 mm - 100 mm) |
| vf connections | ANSI flanged, DIN flanged |
| vt application | semi-trailer silo unloading and bulk silo overfill protection |
| sleeve materials | Natural rubber, EPDM, NBR, FDA-compliant materials |
| flow regulation | adjustable to exact percentages via air pressure, for specific dosing in process systems |
| shut off | Bubble-tight shut-off |
| installation orientation | horizontal or vertical, without affecting performance |
| vf size range | DN40 to DN300 |
| Flange standards | DIN EN 1092-1 PN10/16, ANSI B16.5 Class 150 |
| vf max operating pressure | DN40-DN150: 6 bar; DN200: 4 bar; DN250-DN300: 3 bar |
| size range overall | 1" (25 mm) to 60" (1500 mm) |
| Maximum working pressure | up to 300 psi (20 bar), higher on consultation |
| Service temperature range | -50°F to 250°F |
| face to face standards | ASME B16.10, DIN 3202, ISO 5732 |
| actuation modes | double-acting or single-acting pneumatic, fail-open or fail-close configurations |
| sleeve compound options | natural rubber (NR), EPDM, NBR, FPM (fluoroelastomer), silicone, IIR (butyl), CR (polychloroprene), CSM |
| Valve body material | powder-coated cast aluminium, ductile iron, stainless steel, plastics |
| closing pressure rule | closing pressure = line pressure + 25 psi |
| flow area | full port - port area equals 100% of the mating pipe port area through the entire valve length |
| vacuum capability | usable at vacuum pressures down to around 100 mbar without auxiliary equipment |
| operating temp limits | down to -10°C without additional measures; maximum sleeve temperature +130°C (silicone) or +120°C (FPM) |
| enclosed double acting air pressure | the enclosed-body double-acting pneumatic execution requires 5-6 bar of control air pressure to open and close, in both single-cylinder and twin-cylinder builds |
| double acting cylinder size split | single-cylinder builds: 15 mm to 50 mm, twin-cylinder builds: 65 mm to 250 mm |
| enclosed body and flange rating | the enclosed-body pneumatic execution uses an aluminium valve body with PN10/16 flange connections |
| enclosed sleeve compounds | enclosed-body sleeve compounds: natural rubber (standard), natural rubber food quality, EPDM and neoprene |
| pneumatic valve accessories | pneumatic valve accessories: solenoid valve, pressure regulators and limit switches |
| double acting cylinder principle | the valve is pneumatically operated with one or two pneumatic cylinders in a double-acting arrangement |
| fail safe air to open design | normally-closed fail-safe execution: air to open, spring return - air pressure opens the valve and removing the air closes it to the fail-safe position, while the open valve allows full unobstructed flow |
| nc opening pressure by cylinder | single-cylinder builds require 3-4 bar to open; twin-cylinder builds require 5.5-6 bar to open |
| nc max line pressure by size | 15 mm - 32 mm: maximum line pressure 5 bar, 40 mm - 150 mm: maximum line pressure 3 bar, 200 mm: maximum line pressure 2 bar, 250 mm: maximum line pressure 2 bar |
| nc sleeve compounds | normally-closed execution sleeve compounds: natural rubber (standard), EPDM food quality, EPDM and neoprene |
| nc accessories with positioner | normally-closed execution accessories: solenoid valve, pressure regulators and limit switches, plus an electro-pneumatic positioner |
| built in actuator design | the valve body acts as a built-in actuator, eliminating costly hydraulic, pneumatic or electric operators; actuation is accomplished by air or hydraulic pressure placed directly on the elastomer sleeve |
| drop tight closure entrapped solids | the elastomer sleeve is the valve only wetted part, and its rugged flexibility allows the valve to close drop tight around entrapped solids |
| general closure differential rule | in general, 25 psi over line pressure is required for full closure of air actuated pinch valves |
| air actuated product lines | air-actuated Type A, all-rubber air-actuated Type R, air-actuated Series 2600 compact line, air-actuated Series 4700 lightweight line |
| pneumatic envelope din40 300 | pneumatic pinch valve in a durable aluminium body, sizes DN40 to DN300 (1-1/2 to 12 inch), working pressure 2-6 bar for efficient and safe flow regulation, with flanged ends for easy installation |
| socket sleeve temp build | aluminium sockets with steel bushing; sleeve in natural rubber or EPDM; sealing grade per ANSI B16.104 leakage class; working temperature -20°C to +150°C |
| pneumatic accessory program | solenoid valve, pressure switch, pressure regulator, safety protection device, filter, vacuum assembly, proportional regulating valve |
| oval shell air saving lip | the shells of all flanged pinch valves are flat and oval, ensuring low compressed air consumption and guaranteeing the predetermined lip bending direction for 100% shut-off of the medium flow even when large solid particles cover the inner bushing |
| sleeve sole medium contact | the pinch valve features three main components - sleeve, body and actuator - and the sleeve is the only part in contact with the process medium; the materials of all three components can be selected to suit process conditions |
| dn80 pn10 sample envelope | sample pneumatic build: aluminium alloy body, DN80 (80 mm, 3 inch), PN10 rating, RF flanged ends, temperature range -35°C to +130°C, operated on compressed air or fluid |
| reopen on exhaust elasticity | closing relies on compressed air or fluid injected directly into the valve body with a minimum differential pressure of 2 bar, forcing the reinforced rubber sleeve to collapse inward into the same elliptical lip shape; when the air pressure is exhausted the sleeve natural elasticity pops it back open to a full-bore circular state |
| body material and diameter options | body material options: aluminium alloy or stainless steel; nominal diameter DN40-DN300 |
| pneumatic body component materials | body: cast iron, carbon steel, SS304 or SS316, rubber bushing: rubber, stem: carbon steel, platen, trolley and bracket: cast iron |
| pneumatic size pressure class | nominal size DN25 to DN150; nominal pressure PN10, PN16 or 150LB; design and manufacture per ANSI, DIN and JIS; flanged end dimensions per ANSI B16.5, DIN3202 and JIS; inspection and test per BS6755 |
| pn10 face to face table | PN10 flanged table (DN25-DN125), read positionally: face-to-face length L 160-430 mm, length L1 124-318 mm, flange outside diameter D 115-245 mm, bolt circle D1 85-210 mm, bolting 4-14 up to 8-18 |
| actuator options 50 250 | general-series pinch valve dimensions available from 50 mm to 250 mm with manual, pneumatic or electric actuator |
| single sided closing mechanism | both general-series builds use a simple, single-sided closing mechanism and are ideal for low-cycle applications involving abrasion, corrosion and aggressive slurries |
| valve connections | ANSI Flanged, DIN Flanged, Sanitary Tri-Clamp, NPT threaded, BSPP, Weld-on ends, Threaded Spigot |
| body option plastic | Plastic FDA Approved White or Industrial Black or Conductive for XP |
| body option aluminum | Powder Coated Aluminum Industrial Valve Applications |
| body option stainless steel | Electropolished Stainless Steel for Sanitary and Corrosive Valve Applications |
| sleeve natural rubber | Anti-Abrasive, Food Quality |
| sleeve neoprene | Neoprene |
| sleeve viton | Viton |
| sleeve silicon | Silicon |
| sleeve nitrile | Nitrile |
| sleeve hypalon | Hypalon |
| sleeve butyl | Butyl |
| full port flow | 100% full port flow, no cavities, seats, or crevices where solids can accumulate |
| sleeve material options | Natural rubber for abrasive slurries, EPDM for chemical resistance, NBR for oil-containing media, FDA-compliant materials for hygienic applications |
| media isolation | Only the elastomer sleeve and minimal pipe connection contacts the process media |
| closing force control | Adjustable via air pressure |
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。
常見問題
氣動夾管閥有哪些材質可選？
公布的規範列出sleeve materials：Natural rubber, EPDM, NBR, FDA-compliant materials。特定口徑與壓力等級的材質供貨在報價時確認。
氣動夾管閥的報價詢問應包含哪些內容？
執行標準與壓力等級、公稱口徑、閥體與閥座材質、介質及溫度、目的地——缺失的資訊會在報價過程中確認。
氣動夾管閥提供哪些口徑與壓力等級？
本頁面尚未公布該閥門經驗證的口徑與壓力等級範圍——適用於您工況的口徑與壓力等級會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。