Valvole industriali secondo le norme API · ASME · DIN · EN
Valvole a pizzico (pinch)
Valvole che chiudono comprimendo un manicotto elastomerico tra piastre mobili, per fluidi abrasivi, a fanghi e corrosivi dove l'unica parte bagnata è il manicotto stesso.
Ultimo aggiornamento: 2026-10
Specifiche della famiglia
| Nominal valve connection size | DN25 to DN150 |
|---|---|
| Pressure class / nominal rating designation | PN10, PN16, 150LB |
| Sleeve Material | Rubber |
| Materials (component scope as published) | Cast iron, Carbon Steel, SS304, SS316 |
| Sleeve End Options | Extended hubs with clamps to slip over pipe ends, or flanged ends to standard dimensions |
| Enclosure Styles | Exposed-sleeve construction is standard; another style fully encloses the sleeve within a metallic body |
| Vacuum Limit | Exposed sleeves have limited vacuum duty (collapse tendency); encased builds can hold vacuum service by applying vacuum within the metal casing |
| Design standards | ANSI, DIN, JIS |
| Inspection and pressure-test standards | BS6755 |
| internals | Stem: Carbon Steel, Platen: Cast Iron, Trolley: Cast Iron, Bracket: Cast Iron, Handwheel: Cast Iron |
| flange dimension standards | ANSI B16.5, DIN3202, JIS |
| working principle | Full-bore (fully ported) control valve that obstructs flow by pinching an elastic sleeve |
| media isolation | Flowing media is completely isolated from any internal valve parts; the sleeve contains the media and reduces contamination |
| air operated self action | Air-operated builds need no actuator: the valve closes as soon as pressurized air enters the body and reopens by process-flow force when the air exhausts |
| construction | A sleeve molded of rubber or other synthetic material plus a pinching mechanism; all operating portions are external to the valve |
| abrasion resistance | Natural and synthetic rubber/plastic bodies give good abrasion resistance; little sleeve damage keeps flow virtually unimpeded |
| encased operation | Encased builds close by wheel-and-screw, hydraulic, or pneumatic pressure within the metal case forcing the sleeve walls together |
| generic envelope | General envelope: maximum operating temperature about 250 °F with pressure typically 100 psig at 1 in. falling to 15 psig at 12 in.; special builds span -100 to 550 °F at 300 psig |
| throttling character | Elastomer-sleeve construction gives smooth venturi flow, centerline closure and good throttling characteristics |
| sleeve selection rule | Sleeve material is selected on media corrosiveness/abrasiveness, with operation temperature kept within the polymer limit |
| execution options | Buried-service designs and options such as AWWA nuts, chainwheels, stem extensions and bevel gear actuators exist at reference executions |
| manual pressure size tiers | manual builds DN15-DN100 rated up to 5 bar, manual builds DN125-DN200 rated up to 3 bar, manual builds DN250 rated up to 2 bar, a DN80-only manual execution rated up to 6 bar, a high-pressure manual series to 400 mm at 1/6/10/16/25/40 bar pressure steps |
| manual pressure span 3 40 | manual pinch valve maximum operating pressure depends on the type and nominal size and spans 3 to 40 bar |
| manual handwheel pinch bar mechanism | manual builds close the sleeve with one or two pinch bars arranged horizontally above and below the sleeve, guided sideways by two rods and driven through a hand wheel |
| manual incrustation breakaway | closing-induced sleeve deformation causes incrustations inside the sleeve to break away, making the manual build practically blockage-free |
| air operating pressure rule | air-operated builds reach a maximum operating pressure of about 2-6 bar depending on the nominal diameter |
| air flanged series dn40 dn300 | air-operated flanged executions use a white epoxy powder coated aluminium body with PN10/16 flanges in sizes DN40-DN300 |
| air connection series spread | multi-connection air builds (flanges, tri-clamps, weld-on ends, threaded spigot, BSP internal thread) DN10-DN150, BSP internal-thread builds in standard black or white food-quality POM, DN10-DN50, socket-connection builds in stainless steel or POM with PVC or aluminium bodies, DN10-DN50, road-tanker semi-silo connection builds in DN80 and DN100 |
| high performance air series 400mm | a high-performance air-operated series extends to sizes up to 400 mm |
| sleeve compound options ako | natural rubber (standard and food quality), EPDM (standard and food quality), nitrile (standard and food quality), silicone, FKM, CSM, neoprene, butyl |
| air accessories list | solenoids, pressure switches, safety arrangements, vacuum systems, quick exhausts, proportional control, pressure regulators |
| elliptical body lip closure | the elliptical body design makes the rubber sleeve close the same way every time, forming a lip shape that gives completely tight shut-off even with large solids |
| air sleeve rebound reopen | when the compressed-air supply is interrupted and the casing vents, the sleeve reopens by its rebound elasticity, restoring full-bore passage |
| hd construction types | heavy-duty pinch valve series are offered in three construction types: open body, enclosed body, and enclosed/sealed body |
| hd size envelope by construction | open-body builds DN80-DN600 (3-24 in), enclosed builds DN25-DN1000 (1-40 in), enclosed/sealed builds DN25-DN800 (1-32 in) |
| hd pressure envelope by construction | pressure envelope 0-25 bar (0-362 psi) on open-body builds and 0-100 bar (0-1450 psi) on enclosed and enclosed/sealed builds |
| hd temp envelope by construction | temperature envelope -25 to +50 °C (-32 to 122 °F) on open-body builds and -25 to +80 °C (-32 to 176 °F) on enclosed and enclosed/sealed builds |
| two pinch bars centerline closure | during closing, two pinch bars squeeze the valve sleeve shut on the center line; in the open position the valve is full bore with no flow restrictions |
| bubble tight solids flaking | bubble-tight shut-off is maintained even with solids built up on the sleeve wall, and compression flakes crystallized particles off the sleeve surface |
| conical sleeve linear control | a conical sleeve improves controllability and produces a linear control curve |
| sleeve only contact replaceable | the sleeve is the only part in contact with the medium and the only replaceable part, changeable on site |
| control sizing iec60534 | control valve sizing for pinch valves is based on the international IEC 60534 standard, harmonized with ANSI/ISA S75 |
| gl size envelope by body | metal-body general-line builds DN50-DN250 (2-10 in), polyamide-blend plastic-body builds DN50-DN150 (2-6 in) |
| gl pressure envelope | both general-line series are rated 0-10 bar (0-145 psi) |
| gl temp envelope by body | metal-body general-line builds 0 to +110 °C (32-230 °F), polyamide-blend plastic-body builds 0 to +70 °C (32-158 °F) |
| gl face to face en558 | face-to-face dimensions follow industry standard EN 558 series 7, giving easy and quick installation |
| gl body opening tags | general-line metal-body builds carry opening tags in the sleeve as standard; the lighter plastic-body variant uses a corrosion-resistant polyamide-blend body |
| no stretch sleeve arches | one tube design uses two joint-like expansion arches that flex instead of stretch when closing, extending sleeve life |
| wear sensor indicator wire | an embedded wear-sensor indicator wire alerts maintenance personnel when the tube is worn, enabling preventive maintenance |
| inline tube change no recalibration | the tube or sleeve can be changed with the valve in line, saving maintenance time and eliminating the need for recalibration |
| self cleaning flexing antijam | the self-cleaning flexing action of the elastomer tube prevents build-up of scaling deposits and keeps the valve from seizing or jamming even with high solids |
| asme standard face to face | face-to-face dimensions to ASME standard allow drop-in placement into an existing pipeline replacing other standard valves |
| air flanged build listing sample | air-operated flanged builds are listed at DN80 (3 in) PN10 with RF flanged ends, in aluminium-alloy or stainless-steel bodies, including solenoid-integrated executions |
Note di ambito e fonti
| pressure framing | Pressure framing: the referenced general envelope is a sleeve rating (100 psig at 1 in. falling to 15 psig at 12 in., special builds 300 psig), while the tenant page lists flange classes PN10/PN16/150LB - sleeve pressure capacity and flange class are different limits and the mapping is unstated. |
|---|---|
| body concept | Body concept: general references describe the sleeve itself as the valve body (rubber/plastic bodies), while the tenant construction wraps a rubber sleeve in cast iron/carbon steel with cast-iron internals - the tenant build corresponds to the encased style, which references treat as a separate category. |
| duty split | Duty split: reference executions cite excellent throttling characteristics (venturi flow, centerline closure), while the tenant page positions the valve for isolation of abrasive/corrosive media - isolation and modulating duty depend on execution. |
| temperature ceiling | Temperature ceiling: the polymer limit governs operation temperature (about 250 °F general, to 550 °F special), but the tenant page states no temperature band for its rubber-sleeve build - the tenant ceiling depends on the sleeve polymer, which is listed only as generic rubber. |
Ordinazione e documentazione
Documenti
Chiedi con la richiesta il pacchetto di documentazione che ti serve — gli elementi tipici per questa esecuzione (certificati dei materiali, rapporti di prova secondo la norma di ispezione indicata, disegni dimensionali) vengono confermati e forniti con il preventivo.
Preventivo
Una richiesta pronta per il preventivo indica: dimensione nominale e classe di pressione, preferenza di materiali del corpo e della sede, collegamento finale, azionamento, e il fluido di servizio con la sua temperatura. I valori tipici di questa pagina sono gamme di riferimento; i valori vincolanti vengono confermati in fase di preventivo.
Campione e fornitura
Condizioni di fornitura, quantità ordinate e tempi di consegna sono concordati per ordinativo — indica il paese di destinazione e il calendario richiesto con la richiesta.
Stoccaggio e spedizione
Conserva le valvole con sedi e tenute protette da UV, ozono e deformazione, mantieni le protezioni delle facce di tenuta fino all'installazione e, per le esecuzioni con sede in elastomero o PTFE, evita lo stoccaggio prolungato all'aperto — i composti delle sedi invecchiano più rapidamente al sole diretto e al gelo.
Domande frequenti
Cosa deve includere una richiesta di preventivo per valvole a pizzico (pinch)?
La norma e la classe applicabili, la dimensione nominale, i materiali di corpo e seduta, il fluido di servizio con la temperatura e la destinazione — ciò che manca è confermato durante il preventivo.
Quali dimensione e classe di pressione sono disponibili in valvole a pizzico (pinch)?
Un intervallo verificato di dimensione e classe di pressione per questa valvola non è ancora pubblicato su questa pagina — il dimensione e classe di pressione applicabile al vostro servizio è proposto e confermato in fase di preventivo. Inviate le condizioni di servizio con la richiesta e la selezione è indicata nell'offerta.
Quali materiale del corpo sono disponibili in valvole a pizzico (pinch)?
Un intervallo verificato di materiale del corpo per questa valvola non è ancora pubblicato su questa pagina — il materiale del corpo applicabile al vostro servizio è proposto e confermato in fase di preventivo. Inviate le condizioni di servizio con la richiesta e la selezione è indicata nell'offerta.
Tipi di questa famiglia
Tipo
Valvole pinch pneumatiche
Le valvole pinch pneumatiche chiudono e modulano immettendo aria compressa nel corpo attorno a un manicotto elastomerico rinforzato, così il fluido non tocca al
Vedi le specifiche →Tipo
Valvole pinch meccaniche
Le valvole pinch meccaniche comprimono il manicotto elastomerico con una barra orizzontale mossa da un meccanismo di regolazione — volantino, cilindro pneumatic
Vedi le specifiche →Tipo
Valvole pinch di controllo
Le valvole pinch di controllo sono la variante normalmente chiusa della famiglia pinch: l'aria compressa apre il manicotto contro un ritorno a molla, e lo sfiat
Vedi le specifiche →Richiedi un preventivo per Valvole a pizzico (pinch)
Invia qui l'esigenza — una richiesta pronta per il preventivo indica la norma e la classe di riferimento, la dimensione, i materiali, il fluido, la temperatura e la destinazione.
Cosa accade ai tuoi dati è descritto nell'informativa sulla privacy.
Ottieni un preventivo per Valvole a pizzico (pinch)
Invia norma, classe di pressione e dimensione per una richiesta pronta per il preventivo — risposta con documenti e condizioni.