API · ASME · DIN · EN 標準工業閥門
三通控制閥
三通控制閥在單一調節閥體內合併或分流兩股流體——匯流用於將兩股流混合為受控出口，分流用於將一股流分為兩路——在執行器空間、成本或安裝對稱性有要求的場合取代管路三通加二通閥。產品範圍涵蓋 DN20 至 DN400，PN 16 至 PN 100 / Class 150 至 Class 600，端接為法蘭、RF、MF 與 RTJ，閥體 WCB/WC6/CF8/CF8M，密封面 SS304/SS316/鈷鉻硬面合金，流量特性為線性、等百分比與快開，Cv 1.6 至 690，金屬密封洩漏等級 IV 與軟密封等級 VI，在有尺寸表的 DN15-DN300 範圍內面距 118 mm 至 698 mm，分兩個壓力系列（PN1.6-4.0 與 PN6.4）。選型取決於匯流對分流任務、通口間壓力平衡，以及與二通產品線相同的內件/洩漏選擇。
屬於 控制閥 系列
最後更新： 2026-11
系列規格
| Nominal valve connection size | DN20 to DN400 |
|---|---|
| Flow Characteristics | Linear, Percentage, Quick Open |
| Rated flow coefficient | Percentage CV 1.6 to 630, linear CV 1.8 to 690 |
| Seat leakage class | Class III, IV, V and VI per FCI-70.2; metal-to-metal seating Class IV below 0.01% of rated Cv; metal-to-soft seating Class VI bubble-tight |
| Rangeability | 50:1 rangeability with linear characteristic |
| Valve body material | WCB, WC6, CF8, CF8M |
| End connection types | Flanged, RF, MF, RTJ |
| Measured face-to-face length | 118 mm to 698 mm across DN15-DN300 (PN1.6-4.0 series) |
| seat plug materials | SS304, SS316, cobalt-chromium hardfacing alloy |
| Pressure (source-defined) | PN 16 to PN 100, Class 150 to Class 600 |
| allowable leakage | Metal seal: grade IV (0.01% rated capacity); soft seal: grade VI (foam grade) |
| Actuation Options | pneumatic diaphragm, piston, or electric actuators |
| control accessories | pneumatic positioner, electro-pneumatic positioner, limit switch, solenoid valve, air lock relay, volume booster, filter regulator (AFR), position transmitter |
| mixing vs diverting selection | mixing-type valves can also serve diverting duty at small differentials; for sizes above 4 in with considerable pressure differential the mixing type is more suitable |
| flow functions | mixing (two inlets, one outlet), diverting (one inlet, two outlets), bypass |
| port configurations | mixing configuration has two inlets and one outlet combining two streams; diverting configuration has one inlet and two outlets splitting one stream |
| pn rating by size | DN 65-125: PN 25; DN 150-300: PN 16; DN 350-450: PN 10, each max 100 °C (optional 250 °C) |
| Flange standards | DIN 2632 (PN 10), DIN 2633 (PN 16), EN 1092-2, ANSI Class 150, JIS B 2210 5K |
| stainless steel ratings | stainless steel bodies: PN25 for DN 65-125 mm, PN16 for DN 150-300 mm, PN10 for DN 350-450 mm |
| temperature control use | commonly applied where fluid temperature is adjusted through heat exchangers, e.g. heating and cooling circuits, marine diesel, calender presses |
| din size pressure temperature envelope | DN 15 to 500, PN 16 to 160, -196 to +550 °C |
| ansi size class alternative | an ANSI-version family of three-way control valves covers nominal sizes up to NPS 20 with pressure classes from Class 150 to Class 900 (documented in a separate ANSI data sheet) |
| operating temperature packing window | body without insulating section: -10 to +220 °C standard packing, up to +350 °C with high-temperature packing; metal bellows or metal seal versions extend to -196 to +550 °C |
| seat plug leakage class din | metal seat-plug seal leakage class 0.05 % of KVS per DIN EN 60534-4 |
| mixing diverting conversion | conversion between mixing and diverting service by reversing the seat-guided valve plug |
| sizing pressure drop coefficients | control valve sizing terms per DIN IEC 60534-2-1 and DIN IEC 60534-2-2: FL = 0.95, xT = 0.75 |
| din body material grades | cast steel 1.0619, cast steel 1.7357 (high-temperature), cast stainless steel 1.4408 |
| packaging options test connection | two spring-loaded PTFE V-ring packings or two adjustable high-temperature packings; a test connection between the two packings available on request |
| kvs coefficient envelope | available KVS coefficients span 4 (DN 15, 15 mm travel) up to 3600 (DN 500, 120 mm travel); KVS 1000 special version only for DN 250 as mixing valve |
| hvac small mixing envelope | HVAC three-way mixing valve line in sizes 1/2 to 2 inch, screwed NPT end connections, for hot or chilled water in heating and air conditioning systems |
| bronze body pressure rating hvac | screwed cast bronze bodies rated 250 psig per ANSI B16.15-1985 (do not apply the pressure rating to the piping system; up to 400 psig below 150 °F) |
| hvac control media temperature | allowable control media temperature 20 to 281 °F (-7 to 138 °C) |
| hvac water dp limit | maximum recommended differential pressure for water 35 psi (241 kPa) for normal service life; cavitation limitation applies beyond it and exceeding the limit voids the product warranty |
| hvac cv by size example | small-size Cv ratings 2.2, 4.4, 7.5, 14, 20, 28 to 41 with kvs ratings 1.9 to 35 across the 1/2 to 2 inch series; Cv = kvs x 1.156 |
| hvac port piping rule | three-way mixing bodies must be piped with two inlets (ports A and B) and one outlet (port AB) |
| thermal actuator md applications | self-actuated three-way duty: diverting return flow through a cooler or heat exchanger, or bypassing a reservoir loop for rapid system warm-up; mixing two inlet streams to a controlled outlet temperature in cooling-water, lube-oil and hydraulic-fluid cooling circuits |
| Bonnet material | WCB, WC6, CF8, CF8M |
| Seat material | SS304, SS316, cobalt-chromium hardfacing alloy |
| plug metal sealing | SS304, SS316, cobalt-chromium hardfacing alloy |
| plug soft sealing | SS304, SS316, cobalt-chromium hardfacing alloy |
| cage materials | SS304, SS316 |
| guide sleeve | SS304, SS316 |
| Stem material | SS304, SS316 |
| balanced piston | Steel, Aluminium |
| balanced piston ring | Fluorine Ring, SS+Reinforced PTFE, Flexible Graphite Ring |
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。
常見問題
三通控制閥的報價詢問應包含哪些內容？
執行標準與壓力等級、公稱口徑、閥體與閥座材質、介質及溫度、目的地——缺失的資訊會在報價過程中確認。
三通控制閥提供哪些口徑與壓力等級？
本頁面尚未公布該閥門經驗證的口徑與壓力等級範圍——適用於您工況的口徑與壓力等級會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。
三通控制閥提供哪些閥體材質？
本頁面尚未公布該閥門經驗證的閥體材質範圍——適用於您工況的閥體材質會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。