API · ASME · DIN · EN 標準工業閥門
套筒型控制閥
套筒型控制閥經多孔套筒節流，套筒同時為流量特性元件，將空化與噪音控制在內件處而非管路中，閥塞在套筒內導向，變負荷下控制穩定。產品範圍涵蓋 WCB/SS304/SS316 閥體、SS304/SS316+PTFE 閥芯與 PTFE 填料下的 SS304/SS306/PTFE 閥座，額定 Kv 6.9 至 690（線性）與 6.3 至 630（等百分比），額定行程 16/25/40/60 mm，膜片有效面積 280 至 1000 cm²，公稱壓力 PN1.6/4.0/6.4 MPa，固有可調比 50，服務區間標準 -20 至 200℃ 或配散熱閥蓋 -40 至 450℃，訊號區間 20-240 KPa，氣源 0.14-0.4 MPa，附完整 DN25-DN300 尺寸與重量表。選型取決於套筒內件（含定位器或不含）須吸收的壓差、流量特性對迴路，以及閥蓋區間對管線溫度。
屬於 控制閥 系列
最後更新： 2026-10
系列規格
| Pressure class / nominal rating designation | PN 1.6, 4.0, 6.4 (MPa) |
|---|---|
| Rangeability | Inherent adjustable ratio 50 |
| Valve body material | WCB, SS304, SS316 |
| valve core materials | SS304, SS316+PTFE |
| Seat material | SS304, SS306, PTFE |
| packing | teflon |
| rated kv linear | 6.9 to 690 |
| rated kv equal percentage | 6.3 to 630 |
| rated travel | 16, 25, 40, 60 mm |
| diaphragm effective area | 280 to 1000 |
| temperature standard | -20 to 200 |
| temperature heat dissipation | -40 to 450 |
| signal range | 20 to 100, 40 to 200, 20 to 60, 60 to 100, 80 to 240 (Kpa) |
| air supply | 0.14 to 0.4 (Mpa) |
| msv body materials | WCB, CF8, CF8M, SS304, SS316 |
| msv bonnet materials | WCB, CF8, CF8M, SS304, SS316 |
| msv seat material | Stainless Steel |
| msv gasket material | Flexible Graphite+Stainless Steel |
| msv packing material | PTFE |
| msv stem material | Stainless Steel |
| msv end connections | Flanged, Buttweld, Socketweld |
| msv nominal size | DN25 to DN300 |
| msv nominal pressure | PN16 to PN64, Class150 to Class2500 |
| msv actuation | Double Acting, Spring Return |
| ssv body materials | WCB, CF8, CF8M, SS304, SS316 |
| ssv bonnet materials | WCB, CF8, CF8M, SS304, SS316 |
| ssv seat material | Stainless Steel |
| ssv gasket material | Flexible Graphite+Stainless Steel |
| ssv packing material | PTFE |
| ssv stem material | Stainless Steel |
| ssv end connections | Flanged, Buttweld, Socketweld |
| ssv nominal size | DN25 to DN300 |
| ssv nominal pressure | PN16 to PN64, Class150 to Class2500 |
| ssv actuation | Double Acting, Spring Return |
| dstv body type | straight through globe type |
| dstv spool type | non-balanced single seat plug type |
| dstv nominal size | DN25~300 NPS 1〞~ 12〞 |
| dstv nominal pressure | PN16 ~ 100 CLASS 150LB ~ 600LB |
| dstv end connections | flange: FF、RF、MF、RTJ, Welding: SW、BW |
| dstv flange dimension standard | acc. to IEC 60534 |
| dstv bonnet types | Standard type(-5°C~230°C), Radiator type: (-45°C~ higher than230°C occasion ), Low temperature extended type(-196°C~ -45°C), Bellow seal type |
| dstv packing | V type PFTE packing, flex. graphite packing, etc. |
| dstv gasket | Metal graphite packing |
| dstv actuator options | pneumatic: multi-spring diaphragm actuator, piston type actuator., electric: 3810L series smart actuator, PSL series actuator. |
| dstv surface painting | Green color, acrylic acid polyurthene ceramic paint. |
| dstv flow characteristic | Linear, percentage, quick open |
| dstv allowable range | 50: 1 |
| dstv rated cv | Percentage CV10~1400 ,linear CV11~1500 |
| dstv allowable leakage | Metal seal: II grade(0.5% rated capacity)soft seal: V grade |
| dstv allowable tolerance | ±1.5 ±1.0 |
| dstv return difference | ≤1.5 ≤1.0 |
| dstv dead zone | ≤0.6 ≤1.0 |
| dstv endpoint difference | ±2.5 ±2.5 |
| dstv rated travel difference | ≤2.5 ≤2.5 |
| dstv special test | Material penetration flaw detection (PT), radiator test (RT), flow characteristic test, low-temperature test. |
| dstv special treatment | Trim nitrogen treatment, seat hard alloy treatment. |
| dstv example model | ZJHM-16C DN50 |
| dstv structure codes | M: standard sleeve type, MF: soft sealing sleeve, ML: Single level cage type, MT: Two level cage type, MG: sleeve type control valve with radiator, MV: sleeve type with bellow seal, MD: low temperature sleeve type |
| dstv body material codes | C=WCB, LC=LCB, P=CF8, PL=CF3, R=CF8M, RL=CF3M, D=special material |
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。
常見問題
套筒型控制閥的報價詢問應包含哪些內容？
執行標準與壓力等級、公稱口徑、閥體與閥座材質、介質及溫度、目的地——缺失的資訊會在報價過程中確認。
套筒型控制閥提供哪些口徑與壓力等級？
本頁面尚未公布該閥門經驗證的口徑與壓力等級範圍——適用於您工況的口徑與壓力等級會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。
套筒型控制閥提供哪些閥體材質？
本頁面尚未公布該閥門經驗證的閥體材質範圍——適用於您工況的閥體材質會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。