系列規格
| Pressure class / nominal rating designation | 1.0, 1.6, 2.5MPa |
|---|---|
| Valve body material | Cast Iron, Ductile Iron |
| Seat material | Cast Iron, Ductile Iron |
| shell test pressure | 1.5, 2.4, 3.75MPa |
| sealed test pressure | 1.1, 1.76, 2.75MPa |
| Suitable temperature (source-defined) | ≤80°C |
| Suitable Medium | Water, Sewage |
| cover materials | Cast Iron, Ductile Iron |
| Stem material | Cast Iron, Ductile Iron |
| spring materials | Stainless Steel |
| diaphragm materials | Rubber |
| fcA size range | DN50-DN600 (2-24 in) |
| fcA pressure range | PN10, PN16, Class 150 LB, 300 LB |
| fcA temperature range | -20°C to 80°C |
| fcA suitable medium | Clear Water, Sewage, Seawater |
| fcA body styles | Globe, Reduced Port Globe, Angle |
| fcA end connections | 150 Class Flanged, 300 Class Flanged, Grooved, Threaded |
| fcA pilot wetted materials | Stainless Steel Float, Stainless Steel Rod, nickel-copper alloy Pilot Valve Seat |
| fcA float rod extensions | 1 ft, 2 ft, 3 ft |
| fcA pilot mounting | Remotely Mounted Pilot, Valve Mounted Float Pilot |
| fcA body materials | Ductile Iron, Carbon Steel, Stainless Steel |
| fcA actuation limit | Diaphragm actuation up to DN450, Piston type recommended above DN500 |
| fcB function | Non-modulating on-off level control, opens fully at pre-set low level and closes drip-tight at pre-set high level |
| fcB actuation | Hydraulically operated diaphragm main valve with pilot control and float mechanism on the cover |
| fcB level differential | Adjustable high-low level differential 25-450 mm (1-18 in) |
| fcB remote setting | Remote float setting up to 11.5 ft (3.5 m) below the valve |
| fcB min line pressure | Minimum flowing line pressure 10 psi |
| fcB stilling well | Stilling well minimum 8 in / 300 mm diameter |
| fcB size range | 1/2-6 in (15-150 mm) |
| fcB pressure rating | Ductile iron: 250 psi (150 Class flanged), 400 psi (300 Class flanged / grooved / threaded) |
| fcB body materials | Ductile Iron, Cast Steel, Bronze |
| fcB trim materials | Bronze standard, stainless steel optional |
| fcB disc material | Disc: Buna-N rubber, Diaphragm: nylon-reinforced Buna-N rubber, Stem, nut and spring: stainless steel |
| fcC size range | DN32-DN600 |
| fcC pressure rating | PN10, PN16 |
| fcC function | Non-modulating level control valve, precise container level regulation |
| fcC min input pressure | Minimum inlet pressure 0.2 bar |
| fcC min differential pressure | Minimum differential pressure 0.5 bar |
| fcC compact size range | Compact pattern: DN40-DN150 |
| fcC compact installation | Compact pattern installs inside the reservoir above the water level for a virtually constant container level |
| fcD function | Modulating float valves built on a hydraulically operated, single-chamber globe main valve |
| fcD modulating action | Closes drip-tight at maximum level and modulates to maintain tank level |
| fcD anti hunt | Main-stem restriction modulation interrupts hunting |
| fcD main valve sizes | 1/2-8 in (15-200 mm) |
| fcD max pressure rating | Ductile iron bodies rated and stamped 400 psi standard; 600 psi on request |
| fcD max temperature | Maximum temperature 180°F |
| fcD pilot system materials | ASTM B62 bronze, ASTM B16 brass, stainless steel |
| fcD pilot strainer | 40 mesh stainless steel pilot strainer |
| fcD float pilot | Remote float pilot with plastic float |
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。
常見問題
浮球控制閥的報價詢問應包含哪些內容？
執行標準與壓力等級、公稱口徑、閥體與閥座材質、介質及溫度、目的地——缺失的資訊會在報價過程中確認。
浮球控制閥提供哪些口徑與壓力等級？
本頁面尚未公布該閥門經驗證的口徑與壓力等級範圍——適用於您工況的口徑與壓力等級會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。
浮球控制閥提供哪些閥體材質？
本頁面尚未公布該閥門經驗證的閥體材質範圍——適用於您工況的閥體材質會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。