API · ASME · DIN · EN 標準工業閥門
水用減壓閥
水用減壓閥在樓宇供水、消防與配水管網中維持固定的下游壓力，保護衛生器具與水表免受升壓幹管或增壓泵送來的高上游壓力。產品範圍涵蓋鑄鐵、鑄鋼或球墨鑄鐵閥體，不鏽鋼閥座、活塞、環與軸套，DN20 至 DN400，PN16 至 PN64 或 Class 150 至 Class 2500。選型取決於管徑與壓力等級對 PN/Class 區間、不鏽鋼濕潤內件對水質，以及日用需求波動下的流量包絡。供水資料補充飲用水應用框架（引入管位置、水表-配網任務）、減損效益、按流向箭頭安裝的規則、住宅結構的濾芯與一體旁通功能、25-75 psi 住宅設定區間與 50 psi 出廠預設，以及 ASSE 1003/NSF 61 與 BS EN 1567 標準框架。
屬於 減壓閥 系列
最後更新： 2026-11
系列規格
| Nominal valve connection size | DN20 to DN400 |
|---|---|
| Pressure class / nominal rating designation | PN16 to PN64, Class150 to Class2500 |
| Pressure class / nominal rating designation | Class150 to Class2500 |
| Valve body material | Cast Iron, Cast Steel, Ductile Iron |
| Seat material | Stainless Steel |
| piston materials | Stainless Steel |
| ring materials | Stainless Steel |
| sleeve materials | Stainless Steel |
| residential scope | Designed for potable water lines: reduces high inlet pressure to a lower outlet pressure |
| replaceable cartridge | Unitized replaceable cartridge shortens cleaning and maintenance time |
| thermal expansion bypass | Direct-acting integral bypass prevents excessive system pressure from thermal expansion |
| balanced piston response | Balanced piston design reacts smoothly to flow-demand changes and shields outlet from inlet pressure changes |
| reduced pressure range residential | 25-75 psi reduced pressure range with 50 psi typical factory preset (residential brass execution) |
| residential standards | ASSE 1003 listed; NSF/ANSI 61 drinking-water requirements met (lead-free residential execution) |
| integral strainer option | 20-mesh strainer screen available integral to the inlet union |
| fixture protection benefit | Properly adjusted PRVs prevent high-pressure damage and enhance plumbing-system safety |
| maintenance benefit | Lower pressure reduces strain on pipes and fixtures, cutting maintenance cost and extending system life |
| water wastage reduction | Prevents leaks and bursts in pipes, significantly reducing water wastage |
| installation orientation | Install with the flow-direction arrow toward the fixtures; secure with union fittings |
| service connection definition | On private premises the PRV sits in the service connection and reduces potable-water pressure before the private system |
| meter placement | Commonly installed between the meter and the distribution system to hold pressure within the code high-pressure limit |
| drinking water standard | Product standard expectation for drinking-water supply: BS EN 1567:2000 or equivalent |
| wpa supply pressure limit | up to 300psi (20.7 bar) |
| wpa in line serviceability | serviceable without removing the valve from the line |
| wpa thermal bypass function | the flow of water back through the valve into the main when pressures, due to thermal expansion on the outlet side of the valve, exceed the pressure in the main supply |
| wpa bypass hot water limit | will not prevent the pressure relief valve from opening on the hot water supply system with pressure above 150psi (10.3 bar) |
| wpa water savings case | reducing the supply pressure from 80-50psi (551-345 kPa) resulted in a water savings of 30% |
| wpa install trigger threshold | supply main pressure exceeds 60psi (413 kPa) |
| wpa material schedule | Body: Lead Free* cast copper silicon alloy Seat: Thermoplastic Cage: Thermoplastic Integral Strainer: Stainless steel Diaphragm: Reinforced EPDM Valve Disc: EPDM |
| wpa temperature range | 33F 180F (0.5C 82C) |
| wpa standards listing | ASSE Standard 1003; (ANSI A112.26.2); CSA Standard B356; and listed by IAPMO |
| wpa lead free wetted limit | contains less than 0.25% of lead by weight |
| wpb nominal diameter | DN15~DN50 |
| wpb design standards | ASSE 1003, ANSI A2.26.2, CSAB356, IAPMO |
| wpb connection standard | NPT to ASME B1.20.1 |
| wpb working medium | Water |
| wpb m1 max pressure | 400psi(2.76MPa) |
| wpb dn32 50 max pressure | 300psi(2.07MPa) |
| wpb two stage rule | two-stage pressure reduction is recommended by adding PRV in series |
| wpc downstream setting range | 15 - 90 psi (100 - 600 kPa) |
| wpc factory setting | 45 psi (300 kPa) |
| wpc max working pressure | 300 psi (2000 kPa) |
| wpc body material | DZR low-lead forged brass CR EN 1982 CC768S |
| wpc seat material grade | EN 10088-3 (AISI 303) |
| wpc certification set | ASSE 1003/CSA B356, NSF/ANSI/CAN 61 (180F/82C Commercial Hot), NSF/ANSI/CAN 372 |
| wpc function definition | reduce and stabilize the pressure of the water entering from the water supply main |
| wpd parallel bypass logic | install two pressure reducing valves in parallel (by-pass) to ensure a stable downstream pressure, even at low flow rates |
| wpd low flow instability | unstable resulting in erratic behaviour at low flow rates |
| wpd compensated seat behavior | the setting pressure remains constant regardless of variations in the upstream pressure |
| wpd diaphragm control trait | Very sensitive to pressure variations; Responsive and accurate control |
| wpd piston first stage trait | stresses (pressure changes or water hammer); Suitable for first-stage installation |
| wpd downstream pipe length limit | limit the length of the pipes downstream of the pressure reducing valves |
| flow cv | DN15=1, DN20=2.5, DN25=4, DN32=6.5, DN40=9, DN50=16, DN65=25, DN80=36, DN100=64, DN125=100, DN150=140, DN200=250, DN250=400, DN300=570, DN350=780, DN400=1020, DN500=1500 |
範圍與來源備註
| size class envelope | Size/class envelope: tenant DN20-DN400 PN16-PN64/CL150-2500 vs the referenced residential brass execution at 25-75 psi outlet with ~140F water - the residential plumbing execution is far below the tenant industrial band; both are water-PRV products but not interchangeable. |
|---|---|
| temperature ceiling | Temperature ceiling: referenced residential execution tops at 140F (180F with CPVC tailpiece at reduced pressure), while the tenant temperature limits are set by elastomer/trim selection at industrial service - envelope is execution-specific. |
| response design split | Response design split: balanced-piston smooth-response framing (plumbing regulator) vs the tenant stainless piston/ring/sleeve industrial build - the balanced-piston benefit is not automatically transferable to the tenant execution. |
| standard layering | Standard layering: code/utility definitions expect BS EN 1567 (or equivalent) for drinking-water supply, while the referenced residential execution is ASSE 1003/NSF 61 - market-dependent product standards, not one universal certificate. |
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。
常見問題
水用減壓閥有哪些材質可選？
公布的規範列出sleeve materials：Stainless Steel。特定口徑與壓力等級的材質供貨在報價時確認。
水用減壓閥的報價詢問應包含哪些內容？
執行標準與壓力等級、公稱口徑、閥體與閥座材質、介質及溫度、目的地——缺失的資訊會在報價過程中確認。
水用減壓閥提供哪些口徑與壓力等級？
本頁面尚未公布該閥門經驗證的口徑與壓力等級範圍——適用於您工況的口徑與壓力等級會在報價過程中提出並確認。請在詢問時附上工況條件，選型結果會在報價中說明。