逆止閥 · 雙瓣逆止閥（dual plate）
凸耳雙瓣逆止閥
凸耳雙瓣逆止閥是雙瓣原理的凸耳閥體版本：兩片彈簧輔助半閥瓣短行程關閉、撞擊低，凸耳閥體以螺栓固定於法蘭之間，即使拆除一側仍留在管線中——這是對夾版本做不到的。基準頁聲明 DN50 至 DN900，Class 150 至 Class 2500，面距 API 594，測試依 API 598。
屬於 雙瓣逆止閥（dual plate） 系列
最後更新： 2026-11
規格
| Valve body material | Cast Iron, Ductile Iron, Cast Steel, Stainless Steel, Aluminium Bronze |
|---|---|
| Disc Materials | Ductile Iron, Stainless Steel, Aluminium Bronze |
| spring materials | Stainless Steel |
| Stem material | Stainless Steel |
| Seat material | EPDM, NBR, VITON, CF8, CF8M |
| Nominal valve connection size | DN50 to DN900 |
| Pressure class / nominal rating designation | Class 150 to Class 2500 |
| Face-to-face dimensional standard | API 594, ASME B16.10 |
| Flange standards | ASME B16.10 |
| Inspection and pressure-test standards | API 598 |
應用與選型指引
Select the lug execution where the valve must stay bolted in the line for upstream isolation or maintenance - pump discharges, service tee-offs and dead-end lines - and the wafer clamp is not acceptable. Size inside DN50 to DN900 against the line class up to Class 2500, pick the seat compound (EPDM, NBR, VITON elastomers or CF8/CF8M metal) for the medium and temperature, and match the face-to-face to API 594.
常見問題
Lug vs wafer dual plate check valve - when is the lug body required?
Both executions share the same fast-closing dual plate principle. The lug body adds threaded bolt bosses, so the valve can hold in the line with one flange dropped for work on the other side - required at pump discharges and dead-end service. The benchmark page keeps the same DN50 to DN900 and Class 150 to Class 2500 envelope as the wafer execution, with API 594 face-to-face.
Which seat compound should I choose?
The benchmark page lists EPDM, NBR and VITON elastomer seats alongside CF8 and CF8M metal seats. EPDM suits water and neutral media, NBR covers oils, VITON widens the temperature and chemical window, and the metal options take hot or abrasive duty. Confirm the medium and temperature before fixing the compound.
What information is needed to quote a dual plate lug check valve?
Nominal size within DN50 to DN900, pressure class up to Class 2500, body material preference (cast iron, ductile iron, cast steel, stainless steel or aluminium bronze), seat compound, and the mating flange standard. Those points define the execution for a quotation-ready inquiry.
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。