規格
| Nominal valve connection size | DN20 to DN300 |
|---|---|
| Pressure class / nominal rating designation | PN16 to PN100, Class 150 to Class 600 |
| applicable medium | Water, Oil, Steam, Gas |
| Working temperature (source-defined) | -196 to 450 C |
| Valve body material | WCB, LCB, CF8, CF3, CF8M, CF3M |
| end connection | Flanged, Butt weld |
| position type | Air pressure increase, valve close or opposite |
| Flow Characteristics | Linear, Equal percentage, Quick open |
| body type | Straight through casting globe type |
| spool type | Balanced double seated type |
| flange connection types | FF, RF, MF, RTJ |
| welding ends | SW, BW |
| flange dimension standard | IEC 60534 |
| bonnet types | I: Standard type (-20 to 230 C), II: Radiator type (-45 C high than 230 C occasion), III: Low temperature extended type (-196 to -45 C), IV: Bellow seal type, V: Warm insulation Jacket type |
| Packing Materials | V type PTFE packing, flex. graphite packing |
| gasket materials | Metal graphite packing |
| actuator types | multi-spring diaphragm actuator, piston type actuator |
| Bonnet material | WCB, WCC, WC6, CF8, CF8M, CF3, CF3M |
| valve plug materials | SS304, SS316, SS316L |
| valve seat materials | SS304, SS316, SS316L |
| sealing ring materials | PTFE |
| Stem material | SS304, SS316, SS316L |
應用與選型指引
Select this execution where a modulating duty is too large for a single-seat trim to actuate economically - high pressure drops on water, oil, steam and gas lines - and a small leakage allowance is acceptable, since the two-seat balance trades tight shutoff for actuating force. Pick the body casting against the medium and temperature, and confirm the linear, equal-percentage or quick-open characteristic against the loop tuning.
常見問題
Why choose a double seat trim on a pneumatic control valve?
Two seats split the pressure load, so the unbalanced force on the plug is largely cancelled and a smaller diaphragm actuator modulates the same duty. The benchmark page declares the balanced double seated spool type in a straight-through cast globe body, DN20 to 300 at PN16 to 100 and Class 150 to 600.
What media and temperatures does the benchmark execution cover?
The benchmark page declares water, oil, steam and gas as applicable media with a -196 C to 450 C working window, carried by standard, radiator, low-temperature extended, bellow seal and insulation jacket bonnet options.
What flow characteristics can be specified?
The benchmark page lists linear, equal percentage and quick open characteristics, with air-to-close or air-to-open action selected on the positioner - match the characteristic to the process gain of the loop being controlled.
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。