減圧弁 · 圧力逃し・維持弁
500X 圧力逃し弁
500X圧力逃し弁は水制御リリーフファミリーの油圧操作・ダイヤフラム駆動仕様です。パイロットが一次圧を検知し、設定圧で余剰圧力を逃がすよう主ダイヤフラム弁を変調するため、余剰流量の排出中に一次側（維持）レベルを保持し、同じボディでポンプや一次幹線を過圧から守り、純粋な逃し動作にも使えます。基準仕様はDN20～DN800、フランジ寸法はPN1.0、PN1.6、PN2.5で表化され、ソースページにより水平配管へ据え付けます。
次のファミリーに属する： 圧力逃し・維持弁 ファミリー
最終更新： 2026-11
仕様
| installation orientation | Install on horizontal piping |
|---|---|
| Nominal valve connection size | DN20 to DN800 |
| flange pressure classes | PN1.0, PN1.6, PN2.5 |
| dimensions dn20 | DN20: L=180, A=330, A1=130, H=550, H1=460, F=116, D=105/105/105 (PN1.0/1.6/2.5), D1=75/75/75 (PN1.0/1.6/2.5), D2=58/58/56 (PN1.0/1.6/2.5), bolts=4-13.5/4-13.5/4-14 (PN1.0/1.6/2.5) |
| dimensions dn50 | DN50: L=240, A=345, A1=135, H=610, H1=516, F=170, D=165/165/165 (PN1.0/1.6/2.5), D1=125/125/125 (PN1.0/1.6/2.5), D2=102/102/99 (PN1.0/1.6/2.5), bolts=4-17.5/4-17.5/4-18 (PN1.0/1.6/2.5) |
| dimensions dn100 | DN100: L=360, A=400, A1=156, H=750, H1=596, F=275, D=220/220/235 (PN1.0/1.6/2.5), D1=180/180/190 (PN1.0/1.6/2.5), D2=158/158/156 (PN1.0/1.6/2.5), bolts=8-17.5/8-17.5/8-22 (PN1.0/1.6/2.5) |
| dimensions dn150 | DN150: L=455, A=435, A1=186, H=864, H1=710, F=355, D=285/285/300 (PN1.0/1.6/2.5), D1=240/240/250 (PN1.0/1.6/2.5), D2=212/212/211 (PN1.0/1.6/2.5), bolts=8-22/8-22/8-26 (PN1.0/1.6/2.5) |
| dimensions dn25 | DN25: L=180, A=330, A1=130, H=550, H1=460, F=116, D=115/115/115 (PN1.0/1.6/2.5), D1=85/85/85 (PN1.0/1.6/2.5), D2=68/68/65 (PN1.0/1.6/2.5), bolts=4-13.5/4-13.5/4-14 (PN1.0/1.6/2.5) |
| dimensions dn32 | DN32: L=180, A=330, A1=130, H=550, H1=460, F=116, D=140/140/140 (PN1.0/1.6/2.5), D1=100/100/100 (PN1.0/1.6/2.5), D2=78/78/76 (PN1.0/1.6/2.5), bolts=4-17.5/4-17.5/4-18 (PN1.0/1.6/2.5) |
| dimensions dn40 | DN40: L=240, A=345, A1=135, H=610, H1=516, F=170, D=150/150/150 (PN1.0/1.6/2.5), D1=110/110/110 (PN1.0/1.6/2.5), D2=88/88/84 (PN1.0/1.6/2.5), bolts=4-17.5/4-17.5/4-18 (PN1.0/1.6/2.5) |
| dimensions dn65 | DN65: L=250, A=355, A1=140, H=625, H1=520, F=180, D=185/185/185 (PN1.0/1.6/2.5), D1=145/145/145 (PN1.0/1.6/2.5), D2=122/122/118 (PN1.0/1.6/2.5), bolts=4-17.5/4-17.5/8-18 (PN1.0/1.6/2.5) |
| dimensions dn80 | DN80: L=285, A=360, A1=146, H=645, H1=538, F=210, D=200/200/200 (PN1.0/1.6/2.5), D1=160/160/160 (PN1.0/1.6/2.5), D2=133/133/132 (PN1.0/1.6/2.5), bolts=8-17.5/8-17.5/8-18 (PN1.0/1.6/2.5) |
| dimensions dn125 | DN125: L=400, A=420, A1=170, H=808, H1=655, F=310, D=250/250/270 (PN1.0/1.6/2.5), D1=210/210/220 (PN1.0/1.6/2.5), D2=184/184/184 (PN1.0/1.6/2.5), bolts=8-17.5/8-17.5/8-26 (PN1.0/1.6/2.5) |
| dimensions dn200 | DN200: L=585, A=480, A1=206, H=1135, H1=805, F=460, D=340/340/360 (PN1.0/1.6/2.5), D1=295/295/310 (PN1.0/1.6/2.5), D2=268/268/274 (PN1.0/1.6/2.5), bolts=8-22/12-22/12-26 (PN1.0/1.6/2.5) |
| dimensions dn250 | DN250: L=650, A=530, A1=226, H=1185, H1=855, F=500, D=395/405/425 (PN1.0/1.6/2.5), D1=350/355/370 (PN1.0/1.6/2.5), D2=320/320/330 (PN1.0/1.6/2.5), bolts=12-22/12-26/12-30 (PN1.0/1.6/2.5) |
| dimensions dn300 | DN300: L=800, A=575, A1=246, H=1325, H1=955, F=580, D=445/460/485 (PN1.0/1.6/2.5), D1=400/410/430 (PN1.0/1.6/2.5), D2=370/370/389 (PN1.0/1.6/2.5), bolts=12-22/12-26/16-30 (PN1.0/1.6/2.5) |
| dimensions dn350 | DN350: L=860, A=620, A1=275, H=1385, H1=990, F=640, D=505/520/555 (PN1.0/1.6/2.5), D1=460/470/490 (PN1.0/1.6/2.5), D2=430/430/448 (PN1.0/1.6/2.5), bolts=16-22/16-26/16-33 (PN1.0/1.6/2.5) |
| dimensions dn400 | DN400: L=960, A=635, A1=286, H=1445, H1=1030, F=715, D=565/580/620 (PN1.0/1.6/2.5), D1=515/525/550 (PN1.0/1.6/2.5), D2=482/482/503 (PN1.0/1.6/2.5), bolts=16-26/16-30/16-36 (PN1.0/1.6/2.5) |
| dimensions dn450 | DN450: L=1075, A=665, A1=320, H=1325, H1=905, F=780, D=615/640/670 (PN1.0/1.6/2.5), D1=565/585/600 (PN1.0/1.6/2.5), D2=532/550/548 (PN1.0/1.6/2.5), bolts=20-26/20-30/20-36 (PN1.0/1.6/2.5) |
| dimensions dn500 | DN500: L=1075, A=695, A1=348, H=1430, H1=960, F=830, D=670/715/730 (PN1.0/1.6/2.5), D1=620/650/660 (PN1.0/1.6/2.5), D2=585/585/609 (PN1.0/1.6/2.5), bolts=20-26/20-33/20-36 (PN1.0/1.6/2.5) |
| dimensions dn600 | DN600: L=1230, A=720, A1=372, H=1565, H1=1020, F=920, D=780/840/845 (PN1.0/1.6/2.5), D1=725/770/770 (PN1.0/1.6/2.5), D2=685/685/720 (PN1.0/1.6/2.5), bolts=20-30/20-36/20-39 (PN1.0/1.6/2.5) |
| dimensions dn700 | DN700: L=1650, A=770, A1=422, H=1755, H1=1160, F=980, D=895/910/960 (PN1.0/1.6/2.5), D1=840/840/875 (PN1.0/1.6/2.5), D2=800/800/820 (PN1.0/1.6/2.5), bolts=24-30/24-36/24-42 (PN1.0/1.6/2.5) |
| dimensions dn800 | DN800: L=1750, A=805, A1=458, H=2230, H1=1515, F=1050, D=1015/1025/1085 (PN1.0/1.6/2.5), D1=950/950/990 (PN1.0/1.6/2.5), D2=905/905/928 (PN1.0/1.6/2.5), bolts=24-33/24-39/24-48 (PN1.0/1.6/2.5) |
用途と選定ガイダンス
Choose this execution where a water system needs upstream pressure protection at waterworks ratings: downstream of pumps and supply headers that must not rise above a set pressure, on branch take-offs that need a sustaining function holding a minimum upstream level while the valve spills the surplus, and on fire-service or irrigation headers where a pilot-set relief point matters more than continuous throttling. Confirm the size within the tabulated DN range against the PN1.0/PN1.6/PN2.5 flange drilling, orient the valve on horizontal piping as the source specifies, and set the pilot to the required relief or sustaining pressure at commissioning.
よくある質問
What does the 500X do differently from a spring relief valve?
A spring relief snaps open and re-closes, cycling with every pressure ripple. The 500X is a pilot-controlled, diaphragm-actuated valve: the pilot modulates the main valve so it relieves or sustains at the set point with controlled travel, which suits pump headers and supply mains where smooth upstream-pressure protection matters more than a crack-open action.
What sizes and ratings does this execution cover?
The source page tabulates main dimensions from DN20 to DN800, with flange dimensions D, D1, D2 and bolt circles given separately for PN1.0, PN1.6 and PN2.5. Face-to-face L, overall A/A1 and heights H/H1 are tabulated per size, and the valve is installed on horizontal piping.
What information is needed to quote a 500X pressure relief valve?
Nominal size within the tabulated range, the flange pressure class (PN1.0, PN1.6 or PN2.5) against the system, the required relief or sustaining set pressure for the pilot, and the installation orientation - the source specifies horizontal piping. The pilot setting fixes the protection point; the size and class fix the flange pattern.
注文と書類
書類
お問い合わせの際に必要な書類セットをお知らせください——この型番仕様の典型的な項目（材質証明書、記載の検査規格に基づく試験報告書、寸法図）は、見積時に確認のうえ供給されます。
お見積り
見積可能なお問い合わせには次の事項をご記入ください：呼び径と圧力レーティング、ボディ・シート材質の希望、接続方式、操作方式、温度を含む使用流体。このページの典型値はベンチマーク参考範囲です。拘束力のある値は見積時に確定します。
サンプルと供給
供給条件、発注数量、納期は注文ごとに協議します——お問い合わせの際に納入国と希望スケジュールをお知らせください。
保管と輸送
バルブはシート・シールを紫外線、オゾン、変形から保護して保管し、据付まで端面保護カバーを取り付けたままにしてください。エラストマーまたは PTFE シートの仕様では、屋外での長期保管を避けてください——シート材料は直射日光と凍結条件で最も劣化が早くなります。
500X 圧力逃し弁 の見積依頼
この型番仕様のご要望をこちらからご提出ください——見積可能なお問い合わせには、メッセージ欄の下に記載のパラメータをご記入ください。拘束力のある値は見積時に確定します。
お客様の情報の取り扱いについては、プライバシー通知をご覧ください。