規格
| Valve body material | 316 SS |
|---|---|
| End connection types | manufacturer tube fitting (both ends) |
| end connection size | 1/8 in |
| orifice size | 0.172 in (4.4 mm) |
| stem type | Vee type shutoff |
| Packing Materials | PTFE |
| stem type options | Vee Type Shutoff, Soft Seal Shutoff |
| End connection types | Duolok Tube Fitting, MNPT, FNPT |
| orifice options | 0.172 in (4.4 mm), 0.250 in (6.4 mm) |
| connection size range | 1/8 in to 1/2 in |
| model series | 400/406/436/438 series in 316 SS (K suffix = soft seal shutoff); 31 orderable models in the catalog table |
應用與選型指引
Select this execution where the medium is dirty, dry or corrosive enough to attack conventional top-packed stems - lower packing keeps the threads out of the flow entirely. It suits small-bore sample, bleed and instrumentation takeoffs: the benchmark execution is a 1/8 in tube-fitting valve with a 0.172 in orifice and vee-type shutoff stem in 316 SS with PTFE packing. Confirm the connection system against the instrumentation tubing standard in use before ordering.
常見問題
Why does packing position matter on a needle valve?
In a conventional top-packed valve the stem threads sit above the packing but still see media migration; dry or dirty media then washes lubricant from the threads and scores the stem, degrading shutoff. Lower packing sits below the threads, so the flow path never reaches them - the threads stay lubricated and the stem stays true over far more operating cycles.
What is the benchmark execution rated for in size and flow?
The catalog straight execution is a 316 SS valve with 1/8 in instrumentation tube fittings at both ends, a 0.172 in (4.4 mm) orifice, a vee-type shutoff stem and PTFE packing. It is listed within a 31-part straight-pattern lower-packing range, so other connection and orifice combinations exist in the same family - state the tubing standard and flow with the inquiry to confirm the matching part.
When should this execution be preferred over a locked bonnet needle valve?
Both serve instrumentation duty; the choice is media-driven. Where thread washout or stem scoring is the dominant risk - dirty, dry, abrasive or crystallizing media - lower packing wins because the threads are out of the flow. Where bonnet back-off under vibration at very high pressure is the dominant risk, the locked bonnet execution is the better match.
訂購與文件
文件
請在詢問時一併說明您需要的文件組合——此結構的常見項目（材質證明、按所列檢驗標準的測試報告、尺寸圖）將於報價時確認並隨附供應。
報價
可直接報價的詢問應說明：公稱口徑與壓力額定、閥體與閥座材質偏好、端部連接、操作方式，以及含溫度的使用介質。本頁的典型值為基準參考範圍；具有約束力的數值於報價時確認。
樣品與供應
供應條件、訂購數量與交期按訂單議定——請在詢問時說明目的地國家與所需時程。
儲存與運輸
閥門儲存時應保護閥座與密封件免受紫外線、臭氧與變形影響，安裝前保留端面保護蓋；彈性體或 PTFE 閥座結構應避免長期戶外存放——閥座材料在陽光直射與冰凍條件下老化最快。