仕様
| Valve body material | Carbon Steel, Ductile Iron, SS316 |
|---|---|
| knife materials | SS304, SS316 |
| Disc Materials | SS304, SS316L |
| wedge materials | SS304, SS316, SS316L |
| packing | PTFE |
| seal ring materials | Polyurethane, EPDM, NBR, VITON |
| yoke materials | SS304, SS316 |
| packing gland materials | CF8, WCB |
| Nominal valve connection size | DN50 to DN400 |
| Pressure class / nominal rating designation | Class 150 to Class 30, PN10 |
| end types | Wafer Type, Lug Type |
| Operation / closure mode | Handwheel, Electric Actuated, Pneumatic Actuated |
| Design standards | MSS SP-81 |
| Face-to-face dimensional standard | MSS SP-81 |
| flanged end standards | DIN, JIS |
| Inspection and pressure-test standards | API 598 |
| seat design | Bi-Directional Resilient Seated, patented perimeter seat design, bubble-tight shutoff in either direction, even on dead end service |
| body construction | One piece cast body |
| applications | isolation and on/off applications, paper, chemical, mining, power, waste water industries |
| media | clean, dirty, viscous and corrosive liquids, sludge, fibrous slurries, clean and corrosive gases |
| design standard options | MSS SP-81, ANSI, API, ISO, DIN, EN, JIS |
| end flange standard | ASME B16.5, ASME B16.47, DIN2533 |
| flange rating options | EN1092 PN10,PN16,PN25, ANSI B16.5 (class 125,150) |
| operation options | Handwheel, Gear, Pneumatic, Hydrau-Pneumatic, Electric |
| body material options | Ductile Iron, Cast Steel, Stainless Steel, Duplex and Special Alloys |
| gate material options | Stainless Steel, Duplex and Special Alloys |
| Service temperature range | -29°C to 120°C |
Pressure class is shown as collected: "Class 150 to Class 30, PN10". The source text's "Class 30" is retained verbatim as a recorded source difference — it is commonly read as a typographical variant of Class 300, but that reading is not asserted here; the governing class is confirmed at quotation.
用途と選定ガイダンス
Specify bi-directional sealing where installation orientation is a real constraint - pump suction headers, manifolds and retrofits where flow direction may reverse or was never fixed. End type decides maintenance philosophy: wafer needs the line drained on both sides, lug allows one side to stay pressurised while the downstream spool is removed.
よくある質問
What does bi-directional sealing change in practice?
A standard knife gate seats on one side only and must be installed with flow against that seat; the bi-directional execution seals either way, so orientation errors and flow-reversal scenarios stop being a risk. The benchmark page covers DN50-DN400 at Class 150 / PN10 in wafer and lug bodies.
Which materials are offered?
Body in carbon steel, ductile iron or SS316; knife and wedge in SS304/SS316; PTFE packing with seal-ring options in polyurethane, EPDM, NBR and Viton - the elastomer pick should follow the medium and temperature.
Which standard governs the valve?
Design, manufacture and face-to-face dimensions to MSS SP-81, flanged ends to DIN and JIS, inspection and test to API 598, with a full DN50-DN400 dimension and weight table on the page.
注文と書類
書類
お問い合わせの際に必要な書類セットをお知らせください——この型番仕様の典型的な項目（材質証明書、記載の検査規格に基づく試験報告書、寸法図）は、見積時に確認のうえ供給されます。
お見積り
見積可能なお問い合わせには次の事項をご記入ください：呼び径と圧力レーティング、ボディ・シート材質の希望、接続方式、操作方式、温度を含む使用流体。このページの典型値はベンチマーク参考範囲です。拘束力のある値は見積時に確定します。
サンプルと供給
供給条件、発注数量、納期は注文ごとに協議します——お問い合わせの際に納入国と希望スケジュールをお知らせください。
保管と輸送
バルブはシート・シールを紫外線、オゾン、変形から保護して保管し、据付まで端面保護カバーを取り付けたままにしてください。エラストマーまたは PTFE シートの仕様では、屋外での長期保管を避けてください——シート材料は直射日光と凍結条件で最も劣化が早くなります。
両方向ナイフゲートバルブ の見積依頼
この型番仕様のご要望をこちらからご提出ください——見積可能なお問い合わせには、メッセージ欄の下に記載のパラメータをご記入ください。拘束力のある値は見積時に確定します。
お客様の情報の取り扱いについては、プライバシー通知をご覧ください。