체크 밸브 · 스윙 체크 밸브

BS 스윙 체크 밸브

물 및 중성 액체 서비스용 BS 표준 구상주철 스윙 체크 밸브 사양입니다: DN50~DN300, PN10/16, 황동 및 NBR 밀폐, 구상주철 보닛입니다. 스윙 체크 패밀리 안에서, 사양이 DIN 또는 ANSI 문서가 아닌 BS 5153 / BS 4504를 인용할 때의 표준 부합 선택입니다.

다음 패밀리에 속함: 스윙 체크 밸브 패밀리

최종 업데이트: 2026-11

BS 스윙 체크 밸브
제품 사진 — 이 모델 구조를 대표하는 이미지

사양

Nominal valve connection size DN50-DN300
Pressure Rating PN10/16
Design standards BS5153, BS 4504 PN6/PN10/PN16
Valve body material Ductile Iron
seal material Brass +NBR
bonnet material Ductile Iron
medium Water and neutral liquid
Service temperature range 0 to 80C

응용·선정 가이드

Choose this execution when the project standard references BS 5153 and BS 4504 flange drillings at PN6-PN16; for DIN-referenced water schemes the DIN EN ductile-iron execution is the closer match. Both are water and neutral-liquid valves limited to 0-80 C on the benchmark page - do not extend them to hot-oil or steam duty.

자주 묻는 질문

Which standard does this execution satisfy?

The specification block cites BS 5153 and BS 4504 PN6/PN10/PN16, which is what separates this execution from the DIN EN ductile-iron swing check variant - the valve principle is identical, the dimensional and flange reference differs.

What is the sealing arrangement?

Brass seal ring with NBR, in a ductile-iron body and bonnet, rated PN10/16 across DN50-DN300 for water and neutral liquids at 0 to 80 C.

Can it be used outside water service?

The page states water and neutral liquid as the medium. Chemical, hydrocarbon or steam duty needs a different material execution - the stainless steel or cast-steel check-valve executions are the applicable families, and medium compatibility should be confirmed at quotation.

주문·서류

서류

문의 시 필요한 서류 세트를 요청해 주십시오 — 이 구조의 일반적인 항목(재질증명서, 명시된 검사 표준에 따른 시험 성적서, 치수 도면)은 견적 시 확인되어 함께 공급됩니다.

견적

견적에 바로 쓸 수 있는 문의에는 다음을 명시합니다: 공칭 구경과 압력 정격, 바디·시트 재질 선호, 접속 방식, 조작 방식, 온도를 포함한 사용 유체. 이 페이지의 전형값은 벤치마크 참조 범위입니다; 구속력 있는 값은 견적 시 확정됩니다.

샘플·공급

공급 조건, 발주 수량, 납기는 주문별로 합의합니다 — 문의 시 납품 국가와 필요한 일정을 알려 주십시오.

보관·운송

밸브는 시트와 씰을 자외선, 오존, 변형으로부터 보호하여 보관하고, 설치까지 단면 보호캡을 유지하십시오; 탄성체 또는 PTFE 시트 구조는 장기 야외 보관을 피하십시오 — 시트 재료는 직사광선과 동결 조건에서 가장 빨리 노화됩니다.

BS 스윙 체크 밸브 견적 요청

이 구조의 요구사항을 여기서 제출하십시오 — 견적에 바로 쓸 수 있는 문의는 메시지 필드 아래에 나열된 파라미터를 담고 있습니다; 구속력 있는 값은 견적 시 확정됩니다.

귀하의 정보가 처리되는 방식은 개인정보 안내문에 설명되어 있습니다.

BS 스윙 체크 밸브 견적 받기

구경, 압력 등급, 재질을 보내 주시면 견적에 바로 쓸 수 있는 문의가 됩니다 — 서류와 조건을 붙여 회신드립니다.

견적 요청